Free AI diagnosis: 30 minutes, and you leave with a plan

Roles

Will AI replace welders?

We looked at the welding trade one task at a time. Public ratings, signs of real AI use and U.S. job numbers show what changes and what stays.

Last reviewed

The short answer

No, not on this data. People who studied the 30 welding tasks said AI could speed up only 2, and the other 28 stay with people. Both of the 2 are planning work, not the weld itself, and AI would need extra software to help.

Key points

  • AI could speed up only 2 of 30 tasks
  • Both are planning and setup choices, not welding
  • 28 hands-on tasks stay with people
  • None of the 30 tasks shows real AI use
  • The government expects 2% more welder jobs by 2035

Tasks

The tasks, one by one

Each row is a real task of this job (15 of 30). The columns show if AI could do it faster, and if people already use AI for it.

TaskCan AI speed it up?Already done with AI?
Operate safety equipment and use safe work habits.NoNot seen yet
Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.NoNot seen yet
Weld components in flat, vertical, or overhead positions.NoNot seen yet
Detect faulty operation of equipment or defective materials and notify supervisors.NoNot seen yet
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.NoNot seen yet
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.Yes, with extra softwareNot seen yet
Mark or tag material with proper job number, piece marks, and other identifying marks as required.NoNot seen yet
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.NoNot seen yet
Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.NoNot seen yet
Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.NoNot seen yet
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.NoNot seen yet
Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.NoNot seen yet
Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.NoNot seen yet
Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.NoNot seen yet
Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.NoNot seen yet

Tasks come from O*NET, the U.S. government list of what each job does (code 51-4121.00). "Can AI speed it up?" comes from a 2023 research study ("GPTs are GPTs"). People who studied each task judged if an AI tool like ChatGPT could do it at least twice as fast. "Yes, AI alone" means the AI tool could do it by itself. "Yes, with extra software" means it would need other programs built around it. "Already done with AI?" comes from Anthropic data on how people use its AI at work. AI that could help with a task does not mean the job goes away. No task here shows up yet in the AI use data. That does not mean AI cannot do them, only that the data has not caught it.

Our data

The job in numbers

We counted all 30 tasks of this job and added the government numbers on pay and jobs.

What we countedNumber
Tasks in this job (government list)30
Tasks AI could speed up, say people2 of 30
Tasks AI could speed up on its own0 of 30
Tasks people already use AI for0 of 30
Share of the work already done with AI (Anthropic)None seen yet
Typical yearly pay, welders, cutters, solderers, and brazers (May 2025)$53,750
Jobs in 2025, welders, cutters, solderers, and brazers437,700
Expected change in jobs by 2035, welders, cutters, solderers, and brazers+2%

Task counts by Nexum from O*NET 51-4121.00 and the 2023 study by Eloundou, Manning, Mishkin and Rock; the share already done with AI comes from the Anthropic Economic Index. Pay, jobs and the 2035 outlook come from the U.S. Bureau of Labor Statistics (https://www.bls.gov/ooh/production/welders-cutters-solderers-and-brazers.htm). Typical pay is the middle point: half of workers earn more, half earn less.

Which tasks stay human

Stays with people

  • Welding in every position
  • Preparing and cleaning surfaces
  • Inspecting and measuring pieces
  • Safe habits on the shop floor

AI could speed up

  • Picking torch tips and filler from a chart
  • Drafting templates from blueprint math

Most welding is physical work, done in one place with one piece of metal.

Running the arc, welding flat, upright or overhead, and handling the tools all stay with people.

So do the checks around the weld. Preparing surfaces, measuring pieces against the plan, spotting bad material and using safe habits all need someone at the workpiece.

Judgment and responsibility stay with the welder too. Picking a method takes knowledge of metals and shapes. Answering for the finished joint is not something software can take over from a screen.

Three ways the job could change

  • AI helps

    Software suggests torch and filler choices; the welder confirms

  • Work shifts

    Less layout math, more welding and checking

  • Fewer people

    Smaller crews if setup and planning get much faster

The 2 tasks AI could speed up show where software might help. They are choosing torches and filler, and working out templates from blueprint numbers.

Everything else in the trade is hands-on. So change is more likely to arrive as better tools than as fewer welders.

Welder jobs and pay

In May 2025, the U.S. Bureau of Labor Statistics put typical yearly pay for welders, cutters, solderers and brazers at $53,750.

Typical means the middle: half of these workers earn more and half earn less.

The same BLS page counts 437,700 jobs in 2025 and expects welder jobs to grow 2% by 2035.

What the AI counts mean

Of the 30 tasks, people said AI could speed up 2, and none of those 2 could be done by AI alone. Both need extra software.

An AI tool by itself would not do them.

None of the 30 welding tasks shows people already using AI, in Anthropic's data.

Read the full approach on our method page.

If you run a business in this field

A fabrication or welding shop spends hours on work around the torch: quotes, material orders, job tracking and customer follow-up. That paperwork can be automated while welding and checking stay with your crew.

One process worth a look is turning a customer's drawing request into a priced quote.

Our guide to AI in manufacturing covers where that fits. Proposal automation shows how quotes can be drafted for a person to approve.

FAQ

Welding and AI questions

  • On this data, no. AI could speed up only 2 of the 30 tasks, say people who studied them, and both are planning tasks, not welding. The hands-on work stays with people.
  • The BLS expects welders, cutters, solderers and brazers to see 2% job growth from 2025 to 2035. There were about 437,700 such jobs in 2025, and typical pay was $53,750 in May 2025.
  • The BLS reports typical pay of $53,750 as of May 2025 and about 437,700 jobs. Slow expected growth and few tasks AI can speed up both point to a steady trade.
  • Only 2 of the 30 welder tasks are in that group. One is fitting torches, tips, filler rods and flux from a welding chart. The other is building templates from blueprint math. Both need extra software.
  • The 2 tasks above come first. One is matching torches, tips, filler rods and flux to a welding chart. The other is making templates from blueprint math. Neither is the weld itself.
  • Yes. Quoting, ordering material and tracking jobs are common candidates for automation, with a person approving anything a customer sees. See AI in manufacturing for more.

Final step

Pick a time. Let's talk.

You leave knowing which processes to automate first and what each one costs you today, whether we work together or not.

You can keep paying for manual work, or find out this week exactly what it costs you.

What happens on the call

  1. Before

    You answer 3 quick questions when you book, so we come prepared.

  2. On the call

    We find the manual work that costs you most and put a number on it, live.

  3. Decide

    An honest read on whether we're the right fit. If we're not, you'll hear it on the call.

Once you book, we look at your site and tools before the call, so the 30 minutes go to your numbers, not introductions.

Prefer to write first? Email us directly: contact@nexumautomations.com

30 minutes · Video call · Free